Industrial Conveyor Belt Fastener also called Belt lacing or Clipper wire hooks for light-duty industrial belts, this type of converyor belt hooks are individual clips welded together via common bar enhance installation safety and ease the meshing of belt ends. Stainless steel material for lightweight belt attachment.

Number 1# belt fasteners we can make length from 300mm to 900 000mm.

Model:U1#   U2#    U3#   U4#  U5#  U6#/industrial belt fastener
Materials:Stainless steel
Size:300mm*12pcs/box 

Flat wire hooks or round wire hooks for filter belts other industrial belt fasteners.

Application: For kinds of kinds of food, medicine, chemical, sludge dewatering, metal and other strong acid and alkali occasions, filter cloth, filter, filter belt connection.

Our Conveyor belt fastener (Clipper hooks) welded to a common bar to enhance installation safety and ease the meshing of belt ends. With different size,the belt fastener can be suitable for the belt thickness range from 1.0mm--5.0mm

Materials:316/316L stainless steel.
No./Box : 300mmWx12pcs.

Type / number of hooks: 300mm wide / 96 and 120 only.

Alligator Conveyor Belt Lacing is easy installed by hand using a hammer or by roller lacer, It is commonly used to install a new conveyor belt or repair an existing belt on powered conveyors in packaging, agricultural, recycling, and scrap handling applications. These mechanical fasteners connect the ends of the belt, and they allow the belt to be installed on the conveyor without having to disassemble the conveyor system, which minimizes downtime for the conveyor.

It is a one-piece design, is applied using only a hammer.

can be used as conveyor and transmission belt and in sanitary operations.

Model number:0# 1# 7# 15# 25#

MR fastener/RS fastener also named Alligator staple conveyor belt lacing consists of conjoined plates that are fastened to the ends of a conveyor belt with staples to provides a strong connection. Alligator staple lacing requires special tools to install which we could offer also called MR fastener machine. It is commonly used to make a new conveyor belt or repair an existing belt on powered conveyors in packaging, agricultural, recycling, and scrap handling applications. 

For light duty belts, by using an open ended hammer tool which allows continuous lacing of wider belts.

Material:stainless steel or galvanized steel.

Model: MR1, MR2,MR3

Material:Stainless steel / Carbon steel

Pacakge：1200mm* 8pcs/box +4pcs pins

Polyester Spiral Joint fasteners also named polyester Spiral Lacing, it is nomally used on polyester spiral mesh belt or needle fabric, be widely used in food industry. Polyester sprial lacing come with the cloth, easy to be sewn

Spiral Lace also call plastic fasteners is non-metallic sewn into belt ends and then joined via a non-metallic pin. 

Roller lacer/ belt fastener equipment is designed as the Flexco standard. roller Lacer,Alligator lacing tool

Size(width):600mm,900mm,1200mm,1500mm

Application: 1# 2# 3# 4# 5# 6#/7# industrial belt fastener

Alligator lacing, filter belt fastener

Hydraulic pump machine tool for industrial light-duty belt fasteners, it is our own design hydraulic pump fastening machine size 300mm, we have 10ton and 16ton, easy operation and efficient.We have two types of belt fastener equipment use for light-duty belts

Application:1# 2# 3# 4# 5# 6#/7# industrial belt fastener,filter belt fastener.

Size:300mm

We have two type of Laundry Conveyor Belt Fasteners Installation Tools, one is laundry hydraulic pump machine, another is electric conveyor belt machine.
hooks machine from the mould and hydraulic system components, through the replacement of mould,  To meet the laundry industry # 25 and # 1 fasteners mooth processing. It can lace belts up to #25 of 6" (150mm) and #1of 8"(210mm)wide

*  through the replacement of mould 300 wide，Meet the filter belt hook  processing

* Separately mould and vise used in conjunction with,user , better for small amount belts repair

Machine equioment of MR series fastener.

Available size:300mm, 600mm

Connecting wire pins for kinds of belt fasteners

Wear resistant nylon & Steel wire

Diameter:Ø1.6mm,  Ø2.2mm,  Ø3.2mm